Sugar for Chocolate: 7 Proven Tips to Buy the Right Grade in Bulk

sugar for chocolate

Sugar for chocolate is the refined white cane sugar that chocolate makers, couverture producers, confectioners and compound coating plants mill and mix with cocoa mass, cocoa butter and milk solids to make dark, milk and white chocolate. For most chocolate the right choice is a clean, dry, low-colour grade such as ICUMSA 45, with very low moisture, low invert sugar and no off-taste, because sugar is usually the largest single ingredient in the bar. White chocolate and pale milk chocolate often go one step whiter, to ICUMSA 35. We sell sugar for chocolate to chocolate factories, confectioners, bakery chocolate suppliers and distributors worldwide, in 50 kg bags or 1 MT jumbo bags, shipped by container.

This guide is written for owners, production managers, R&D staff and buyers at chocolate and confectionery plants, from bean-to-bar workshops to big couverture lines. It explains what sugar actually does in chocolate, how much goes in, which grade suits which product, why moisture matters more than colour, how sugar is milled and refined, how sugar bloom happens, what to check when a container arrives, and how to buy at a fair delivered price. We link to standards and research where we use them. Where something is our own view as a sugar supplier, we say so.

sugar for chocolate

Sugar for chocolate: what we sell

These are the grades chocolate and confectionery makers buy from us. Each product page has the full specification sheet, packing details and documents.

  • Refined ICUMSA 45 sugar: 45 IU max, polarization 99.80% min, moisture 0.04% max, ash 0.04% max. The standard grade for dark chocolate, milk chocolate, compound coatings, fillings and cocoa drink mixes.
  • Refined sugar ICUMSA 35: 35 IU max, polarization 99.80% min, moisture 0.04% max, SO₂ 20 mg/kg max. For white chocolate, pale milk chocolate and white coatings where every trace of colour shows.
  • Crystal white sugar: sparkling white refined cane sugar, polarization 99.8% min, even crystal size. Mills cleanly and evenly, which keeps refining predictable.
  • Cane sugar ICUMSA 100: 100 IU max. For dark compound coatings, cocoa spreads and baking chocolate where colour is hidden and the buyer has tested it.
  • Raw brown cane sugar Grade E: ICUMSA 600 to 1200. A niche choice for craft and specialty bars that want caramel and molasses notes on purpose.

Packing: 50 kg PP bags with inner PE liner, or 1 MT jumbo bags. Shipping: 20 ft containers, about 25 MT each. Terms: FOB or CIF your port. Documents: SGS or equivalent inspection, certificate of analysis, origin and phytosanitary certificates. Ask for a chocolate sugar quote.

See every grade we carry on our products page.

Table of Contents

Why sugar for chocolate deserves more attention than it gets

Most chocolate makers spend their energy on cocoa. That makes sense: cocoa sets the flavour, and cocoa prices have been brutal. Sugar for chocolate tends to get bought on price alone. But in most bars, sugar is the ingredient you use the most of. Food research body Campden BRI notes that chocolate is typically mostly composed of sugar, cocoa mass and cocoa butter. In a sweet milk or white chocolate, sugar is often the biggest single share of the recipe.

That means small problems with sugar for chocolate turn into big problems in the finished product. A bit of extra moisture makes the chocolate thick and hard to pump. A slightly off taste carries straight into a delicate white chocolate. Uneven crystals mill unevenly and leave grit. Damp, lumpy bags slow down the line.

The cocoa market has made this more important, not less. The International Cocoa Organization put global cocoa grindings at about 4.606 million tonnes in its February 2026 bulletin, after two years of weak demand driven by record cocoa prices. When cocoa is that expensive, nobody wants to lose a batch of chocolate because the sugar was wrong. Good sugar for chocolate is cheap insurance on very expensive cocoa.

cocoa beans and chocolate made with refined sugar

How much sugar goes into chocolate

How much sugar for chocolate you need depends on the type of chocolate and on the rules in your market. The Codex standard for chocolate sets minimum cocoa contents. In the Codex text published by FAO, plain “chocolate” must contain at least 35% total cocoa solids on a dry matter basis, with at least 18% cocoa butter and 14% fat-free cocoa solids, and “sweet (plain) chocolate” at least 30% total cocoa solids. The current version is listed as CXS 87-1981, Standard for Chocolate and Chocolate Products. National rules differ, so check yours.

What’s left after the cocoa (and milk, in milk chocolate) is mostly sugar. So a dark chocolate at 35% cocoa can carry well over half its weight as sugar, while a 70% dark bar carries much less. Milk and white chocolate usually sit at the sweet end.

Here’s what that means for purchasing. These are our own worked numbers, not a standard, and your recipe will differ:

Sugar share in recipe Sugar per tonne of chocolate Chocolate from one 25 MT container of sugar
30% (dark, about 70% cocoa) 300 kg about 83 tonnes
45% (sweet dark or milk) 450 kg about 55 tonnes
50% (sweet milk) 500 kg 50 tonnes
55% (white or compound coating) 550 kg about 45 tonnes

A mid-sized milk chocolate plant can work through a container of sugar for chocolate in a couple of weeks. That’s why regular buyers plan monthly or quarterly shipments rather than buying one container at a time.

What sugar actually does in chocolate

Sugar for chocolate isn’t just there for sweetness. It’s a big part of the structure, and it changes how the chocolate behaves in the factory.

It sweetens and balances bitterness

This is the obvious one. Cocoa on its own is bitter and astringent, and sugar for chocolate is what makes it pleasant to eat. Sugar balances that, and the amount you use is one of the main levers on flavour. Darker bars use less; milk and white bars use more.

It forms most of the solid particles

Melted chocolate is a suspension. As a study in Physics Today describes it, melted chocolate contains sugar, cocoa and milk powder particles dispersed in a fat melt, usually cocoa butter. In sweet chocolate, sugar crystals are a large share of those particles. How big they are, what shape they are and how well they’re coated with fat decides how the chocolate feels in the mouth and how it flows through pipes and enrobers.

It affects flow and viscosity

Sugar particles are hydrophilic and cocoa butter isn’t, so the two don’t mix naturally. That’s why chocolate makers use emulsifiers. Campden BRI explains that lecithin and PGPR are added because they act at the interface between the hydrophilic sugar particles and the continuous fat phase. A Korean study of cocoa butter and sugar suspensions found that viscosity and yield value rose as the sugar was ground finer. In practice, the way you mill your sugar for chocolate has a direct effect on how much fat and emulsifier you need.

It helps texture and snap

Fine, well-coated crystals of sugar for chocolate give a smooth melt. Too many large crystals feel gritty. Too many very fine ones make the chocolate thick and pasty. The right balance is part of what gives good chocolate its clean snap and silky melt.

pieces of chocolate made with sugar for chocolate

Particle size: why sugar for chocolate has to be milled

Here’s the thing that surprises people new to chocolate: the crystal size of the sugar you buy doesn’t end up in the bar. Chocolate makers grind it down hard. The target is a particle size that the tongue can’t detect.

The industry figure everyone works to is about 30 microns. Instrument maker Malvern Panalytical notes that decades of consumer testing by chocolate manufacturers found that particles of cocoa solids, sugar and milk are detected as a gritty mouthfeel at sizes over 30 µm. HORIBA adds that particles below 20 µm feel silky and smooth.

Different chocolates end up with different amounts of coarse particles. In a Malvern application note measuring one manufacturer’s products, the share of particles above 30 µm was 2.13% in dark, 12.56% in milk and 17.32% in white chocolate. Sugar makes up a bigger share of the particles in milk and white chocolate, which is one reason those products are harder to get perfectly smooth.

Too fine is also a problem

You can overdo it. A US patent on reduced-fat chocolate notes that an excess of fine particles below 5 microns makes chocolate extremely thick and hard to pump, deposit and enrobe. Every new surface needs fat to coat it. So the aim isn’t “as fine as possible”. It’s a controlled spread of sizes.

How the milling is done

Chocolate makers mill sugar for chocolate in a few common ways:

  • Pre-grinding to icing sugar in a hammer or pin mill, then mixing with cocoa mass and fat before roll refining.
  • Mixing granulated sugar with cocoa mass and taking it straight through a two-roll and five-roll refiner, which crushes the crystals.
  • Ball mills and melangeurs, common in compound coatings and in bean-to-bar workshops, which grind sugar and cocoa together over hours.
  • Crumb, used by many milk chocolate makers, where sugar is cooked with milk and sometimes cocoa liquor, dried and then refined.

Whatever the route, you want sugar that mills predictably: dry, even crystals, low fines, no lumps, no foreign matter. That’s what we focus on when we ship sugar for chocolate.

A safety note on milling sugar

Fine sugar dust is combustible. The US Chemical Safety Board investigated the 2008 explosion at a Georgia sugar refinery and found it was fuelled by massive accumulations of combustible sugar dust. If you mill sugar on site, treat your sugar mill and sifting room as a dust explosion risk: proper dust extraction, explosion protection on the mill, good housekeeping and trained staff. That’s not a sales point. It’s just something every chocolate plant milling its own sugar should take seriously.

roasted cocoa nibs ready to be refined with sugar

Moisture: the specification that matters most in sugar for chocolate

If you remember one thing from this guide, make it this. In chocolate, water is the enemy. Because it makes up so much of the recipe, sugar for chocolate is the ingredient most likely to bring water in.

Campden BRI notes that moisture in chocolate is usually kept below 2%, because water makes the chocolate very thick as sugar particles bind together and the yield value rises sharply. The US patent cited above goes further: it reports that both yield value and plastic viscosity increase with moisture levels above 1.1%, and explains this as layers of syrup forming on the surface of sugar particles and increasing friction between them.

In plain terms: damp sugar for chocolate makes thick chocolate. Thick chocolate needs more cocoa butter or emulsifier to flow, and cocoa butter is expensive. Very damp sugar can make chocolate seize altogether.

That’s why we contract our ICUMSA 45 and ICUMSA 35 grades at 0.04% moisture max at loading. The job after that is to keep it dry:

  • Use bags with a proper inner PE liner, which is what we ship as standard.
  • Keep containers closed and cool on the quay, and get them unloaded quickly.
  • Store sugar in a dry warehouse, off the floor and away from walls.
  • Let cold sugar warm up before you open bags in a warm, humid room, so water doesn’t condense on it.
  • Don’t leave opened bags standing in a humid production hall.

Colour, purity and taste: which grade of sugar for chocolate

Colour matters less in chocolate than in a clear drink, because cocoa is dark. But it isn’t irrelevant, and purity and taste always matter. Here’s how we’d choose sugar for chocolate by product.

White chocolate and white coatings: ICUMSA 35

White chocolate is cocoa butter, milk solids and sugar. There’s no cocoa mass to hide anything. Any colour or off-note in the sugar shows. We’d use refined sugar ICUMSA 35 here. Our guide to ICUMSA 35 sugar explains this grade in more detail.

Milk chocolate: ICUMSA 45 or 35

Milk chocolate is pale enough that very poor sugar can dull its colour, but ICUMSA 45 works well for most milk chocolate. Premium pale milk chocolate makers sometimes prefer ICUMSA 35.

Dark chocolate: ICUMSA 45

Cocoa hides colour completely. ICUMSA 45 is the normal choice because it’s clean, pure and neutral in taste. See our white refined sugar ICUMSA 45 page for the full spec and our food grade ICUMSA 45 sugar guide for the safety and certification side.

Compound coatings, spreads and baking chocolate: ICUMSA 45 or tested ICUMSA 100

Compound coatings use vegetable fats instead of cocoa butter and are often heavily flavoured. Some makers save money with ICUMSA 100 cane sugar in dark coatings and spreads. It can work, but test it in your own product, especially for taste.

Craft and specialty bars: sometimes brown sugar on purpose

Some bean-to-bar makers use raw cane or brown sugars to add caramel and molasses notes. That’s a flavour decision. Brown sugars carry more moisture and more impurities, so they behave differently in refining and conching. Read our guide to bulk brown sugar if you’re considering it.

A quick decision table

Product Usual grade Watch for
White chocolate, white coatings ICUMSA 35 Colour, taste, moisture
Milk chocolate ICUMSA 45 (or 35 for pale premium) Moisture, taste
Dark chocolate and couverture ICUMSA 45 Moisture, foreign matter
Compound coatings ICUMSA 45 or tested ICUMSA 100 Taste, moisture
Cocoa spreads and fillings ICUMSA 45 or tested ICUMSA 100 Grit, taste
Cocoa drink mixes ICUMSA 45 Crystal size, dissolving, caking
Craft bars with caramel notes Raw or brown cane sugar Moisture, consistency

white chocolate in a tempering wheel made with ICUMSA 35 sugar

Sugar for chocolate in compound coatings, cocoa mixes and fillings

Not every chocolate plant makes tablets and couverture. A lot of the sugar for chocolate we ship goes into products that sit around chocolate: compound coatings for biscuits and ice cream, cocoa drink powders, hazelnut and cocoa spreads, praline fillings and chocolate chips for bakeries. Each one uses sugar a little differently.

Compound coatings

Compound coatings swap some or all of the cocoa butter for vegetable fats, so they don’t need tempering. They’re often sweeter than real chocolate and are made on ball mills or roll refiners. Sugar for chocolate coatings needs the same low moisture as real chocolate, because thick coating gives uneven layers on biscuits and wafers. Colour matters only for white and pastel coatings.

Cocoa drink mixes

Here the sugar isn’t refined into a paste. It’s blended dry with cocoa powder, milk powder and flavours. Crystal size matters a lot: crystals that are too fine cake in the pack, crystals that are too coarse separate from the cocoa. Even, free-flowing crystal sugar for chocolate drink mixes keeps the blend uniform from the first scoop to the last.

Spreads and fillings

Spreads and praline fillings are fat-based, like chocolate, so the same 30 micron rule applies to grit. Sugar is often the largest ingredient. A clean, neutral sugar for chocolate spreads lets hazelnut and cocoa flavours come through. Moisture still matters, because water in a fat-based filling can cause separation and shorten shelf life.

Chocolate chips and bake-stable drops

Bake-stable chips usually have a higher yield value so they hold their shape in the oven. Sugar particle size and moisture both affect that. Bakeries that use these chips sometimes buy their own sugar from us too; our bakery sugar guide covers that side.

Reduced-sugar chocolate: what it means for sugar buyers

Many brands are cutting sugar, pushed by health campaigns, labelling rules and consumer demand. For a buyer of sugar for chocolate, that changes a few things.

First, tonnage per tonne of chocolate falls slightly, but rarely by much. Sugar does a structural job in chocolate, as well as sweetening, so it can’t simply be taken out. Whatever replaces it has to fill the same space as solid particles. Campden BRI points out that some sugar replacers have an undesirable cooling effect, different sweetness and water of crystallization that can cause gritty agglomerates. That’s why most reformulation is gradual.

Second, higher-cocoa recipes are growing. A 70% dark bar uses far less sugar for chocolate than a 35% bar, but it still needs a clean, dry, neutral sugar, because with less sugar any off-note in it is easier to taste.

Third, consistency matters even more. When the recipe is tight, there’s less room to absorb variation in the sugar. Our advice is to keep the same grade and origin wherever you can, and trial any change properly.

The specification to put in your contract

When a chocolate plant sends us a purchase specification for sugar for chocolate, these are the items that matter. Our standard contract figures are shown. If you need tighter limits, tell us at the quotation stage and we’ll tell you plainly whether we can meet them.

Parameter Our ICUMSA 45 Our ICUMSA 35 Why it matters in chocolate
Colour 45 IU max 35 IU max Shows in white and pale milk chocolate
Polarization 99.80% min 99.80% min Purity and clean taste
Moisture 0.04% max 0.04% max Viscosity, yield value, seizing
Ash 0.04% max 0.04% max Taste, purity
Taste and odour Clean, sweet Clean, sweet Sugar flavours the whole bar
Foreign matter Free from Free from Refiner damage, food safety
Flow Free flowing Free flowing Even feeding to mills

Other items chocolate makers often add: invert (reducing) sugar limit, microbiology (yeast, mould, total plate count, Salmonella absent), metal detection at packing, allergen statement, and a crystal size range if you feed sugar straight into a refiner. Write them into the contract. A specification that isn’t in writing can’t be enforced. Our article on ICUMSA sugar grades explains how the colour numbers work.

Sugar bloom: when the problem shows up on the shelf

Sugar bloom is a dull, dusty white coating on the surface of chocolate. It’s harmless, but customers see it and think the chocolate is old or fake.

It’s caused by moisture. As the overview of chocolate bloom on Wikipedia summarises, condensation on the surface or moisture in the chocolate makes the sugar dissolve, and when the moisture evaporates the sugar forms larger crystals, leaving a dusty layer. Chocolate supplier Callebaut puts it simply: all the causes of sugar bloom have to do with humidity.

Sugar bloom is mostly a storage and handling problem, not a sugar quality problem. It’s different from fat bloom, which comes from cocoa butter and tempering. But damp sugar for chocolate adds to the overall water in the chocolate, which doesn’t help. The practical fixes:

  • Keep finished chocolate at a steady, cool temperature and low humidity.
  • Let chilled chocolate warm up in its packaging before opening.
  • Make sure moulds are completely dry.
  • Keep ingredient moisture low, starting with the sugar.

chocolate moulding and tempering in a factory

Conching, tempering and where sugar fits in the process

Here’s a simple picture of how sugar for chocolate moves through a typical plant.

  1. Receiving and storage. Bags or jumbo bags arrive, are checked and stored dry.
  2. Milling or mixing. Sugar is pre-ground, or mixed with cocoa mass, cocoa butter and milk powder into a paste.
  3. Refining. The paste goes through roll refiners or ball mills until the particles are below the target size. Microtrac’s application note describes conching starting at around 100 µm and finishing at 15 to 30 µm.
  4. Conching. Long, warm mixing that drives off moisture and unwanted volatile acids and coats the sugar particles with fat. Campden BRI notes that conching helps decrease the moisture content of the liquid chocolate and so its thickness.
  5. Standardising. Final cocoa butter and emulsifier are added to hit the target viscosity.
  6. Tempering, moulding or enrobing, cooling and packing.

Sugar for chocolate affects almost every step: how easily it mills, how much moisture conching has to remove, how much fat you need to reach the right flow. Dry, consistent, clean sugar makes the whole line easier to run.

How to check sugar for chocolate when it arrives

The certificate of analysis tells you what the sugar was like at loading. Your own checks tell you what it’s like after weeks at sea. Here’s a simple routine. Adjust it to your quality system.

  1. Match the documents to the cargo. Container and seal numbers, lot numbers and the certificate of analysis should line up. Our guides to the sugar certificate of origin and the sugar HS code cover the paperwork.
  2. Inspect the bags. Look for wet patches, torn liners, strong smells, insects and hard lumps. Photograph anything odd.
  3. Sample across the container. Not just the bags by the door. Keep a sealed retained sample from every lot.
  4. Check moisture first. It’s the number that matters most in sugar for chocolate.
  5. Taste and smell. A clean sugar solution should taste only of sweetness.
  6. Check colour if the sugar is going into white or milk chocolate.
  7. Sieve for foreign matter and lumps. Anything hard can damage refiner rolls.
  8. Run microbiology to your own limits.
  9. Do a small trial batch when you change origin or supplier, and check viscosity and particle size against your normal sugar.

Storage and handling of sugar for chocolate

  • Dry and off the floor. Clean pallets, away from walls, no wet areas.
  • Steady temperature. Big swings move moisture inside bags and form lumps.
  • Away from smells. Sugar picks up odours, and chocolate shows them. Keep it away from fuel, chemicals, spices and cleaning products.
  • First in, first out, with lot records so any batch of chocolate can be traced back to its sugar.
  • Control the tipping point. Use bag cutters, magnets and a sieve before the mill.
  • Jumbo bags for big lines. A 1 MT jumbo bag with a bottom spout and a discharger is faster and cleaner than cutting twenty 50 kg bags.

Our article on industrial sugar for food manufacturers covers bulk handling in more depth.

refined white sugar for chocolate making

What drives the delivered price of sugar for chocolate

The price you pay for sugar for chocolate at your gate is built from several parts. Only one of them is the world sugar market.

  • World white sugar price. It moves with crops in Brazil, India and Thailand, energy prices and currencies. Our articles on Brazilian sugar, Thai sugar and Indian sugar explain how origins shape supply.
  • Grade premium. ICUMSA 35 costs a little more than ICUMSA 45, which costs more than ICUMSA 100.
  • Packing. Jumbo bags are usually cheaper per tonne than 50 kg bags and faster to unload.
  • Freight. Container rates change by route and by month.
  • Import duties and taxes. These vary a lot by country. Check your tariff for the sugar HS code before comparing quotes.
  • Port, clearance and inland transport. Easy to forget in early budgets.

Our guides to sugar import prices, sugar export prices and sugar wholesale prices walk through the costs. Compare quotes for sugar for chocolate on the same basis: same grade, same spec, same packing, same Incoterm, same port.

7 proven tips to buy the right sugar for chocolate

1. Start from the chocolate, not the sugar

White, milk, dark, compound or spread? That decides which sugar for chocolate you buy: whether you need ICUMSA 35 or 45, and how much colour matters.

2. Make moisture your first line in the contract

For chocolate, moisture is more important than colour. Put it first, and check it first on arrival.

3. Ask for lot-specific results

A general brochure tells you what a mill usually makes. A certificate of analysis on your lot, plus an independent inspection report, tells you what you’re buying.

4. Trial new sugar in a real batch

When you change supplier or origin, run a batch and check viscosity, particle size and taste against your normal sugar for chocolate before you switch the whole plant.

5. Buy on a schedule

Regular containers keep stock fresh and dry and protect you from one late ship stopping the line. Our guide to buying sugar in bulk covers contract structures.

6. Choose packing that suits your mill

Small plants with manual tipping often prefer 50 kg bags. Larger plants with bag dischargers usually save money with 1 MT jumbo bags.

7. Work with a supplier who handles logistics properly

A good price means nothing if the sugar arrives late or damp. Our articles on what a real sugar logistics supplier handles and choosing a global sugar exporter are good places to start.

container ship being loaded with sugar for export

How to order sugar for chocolate from us

  1. Send your enquiry. Grade, quantity, packing, destination port and any extra specification. Use our contact page.
  2. Get a quotation with price, specification, packing, Incoterm, shipping window and documents.
  3. Agree the contract in writing: specification, quantity, price, payment terms and schedule.
  4. Inspection and loading. Sugar is inspected at loading by SGS or an equivalent agency.
  5. Documents. Bill of lading, invoice, packing list, certificate of analysis, inspection report, certificate of origin and phytosanitary certificate.
  6. Arrival. You clear the cargo, run your checks and start production.

Our shipping policy and FAQs answer common questions about timing, payment and claims.

Common mistakes when buying sugar for chocolate

  • Buying on colour alone. In chocolate, moisture and taste cause more trouble than colour.
  • Ignoring the warehouse. Dry sugar at loading can still arrive damp if containers sit in the sun and humidity for weeks.
  • Switching origin without a trial. Different sugars mill differently.
  • Milling without dust control. Sugar dust is a real explosion hazard.
  • Skipping retained samples. Without them you can’t investigate a complaint months later.
  • Trusting offers that look too good. The sugar trade has its share of fake offers. Our guide to spotting a real sugar trader explains the warning signs.

fermenting cacao seeds before chocolate making

Sugar for chocolate compared with other food uses

If you make more than chocolate, it helps to see how sugar for chocolate compares. Chocolate is strictest on moisture and milling behaviour. Drinks are strictest on colour, ash and floc; see sugar for soft drinks. Sweet makers care about crystal size and reducing sugars; see sugar for confectionery. Biscuit plants care about crystal size and spread; see sugar for biscuits. Dairy plants care about microbiology and dissolving; see sugar for dairy. Bakeries using chocolate in cakes and pastries can also read our bakery sugar guide.

Frequently asked questions about sugar for chocolate

What is the best sugar for chocolate?

For most chocolate, the best sugar for chocolate is refined white cane sugar at ICUMSA 45, with very low moisture, high purity and a clean taste. Use ICUMSA 35 for white chocolate and pale milk chocolate.

Why does moisture matter so much in chocolate?

Water makes sugar particles stick together, which raises the viscosity and yield value of chocolate. Chocolate is usually kept below about 2% moisture, and research shows flow problems rising above about 1.1%. Dry sugar for chocolate makes processing easier and saves cocoa butter.

What particle size does sugar need to be in chocolate?

Most of the particles need to be below about 30 microns, or the chocolate feels gritty. Particles below about 20 microns feel silky. Chocolate makers grind sugar down during milling and refining, so the crystal size you buy is a starting point, not the final size.

Can I use powdered (icing) sugar instead of granulated?

Many plants pre-grind granulated sugar to icing sugar on site, just before use. Buying ready-made powdered sugar from far away is risky because it picks up moisture and cakes easily, and it often contains anti-caking agents. Shipping granulated sugar for chocolate and milling it on site is the usual approach for importers.

Does sugar cause chocolate bloom?

Sugar bloom is caused by moisture, usually condensation or humid storage, which dissolves sugar on the surface. When the water evaporates, the sugar recrystallises as a dusty white layer. It’s a storage problem more than a sugar quality problem.

Is ICUMSA 45 good enough for white chocolate?

It can be, but many white chocolate makers prefer ICUMSA 35 because there’s no cocoa mass to hide colour or off-notes.

Can I use brown sugar in chocolate?

Yes, for specialty bars that want caramel notes. Expect more moisture and more variation, and test carefully. It’s a flavour choice, not a cost saving.

How much sugar do I need per tonne of chocolate?

Roughly 300 kg for a 70% dark bar and 450 to 550 kg for sweet milk, white chocolate or coatings. One 25 MT container of sugar makes roughly 45 to 80 tonnes of chocolate depending on the recipe.

What packing do you offer?

We pack sugar for chocolate in 50 kg PP bags with an inner PE liner, or 1 MT jumbo bags. A 20 ft container carries about 25 MT.

Where do you ship?

We ship sugar for chocolate worldwide by container on FOB or CIF terms. Tell us your port and we’ll quote.

Get a quote for sugar for chocolate

If you make chocolate, couverture, compound coatings, spreads or cocoa drinks and want a steady supply of dry, clean refined cane sugar, we’d be glad to quote. Tell us the grade, quantity, packing, your port and any extra specification, and we’ll come back with price, documents and a shipping window. Contact us here or browse all our sugar products.

Sources and References